How to Replace the Cover on an ActiveDogs Raised Dog Bed
By ActiveDogs | Published: 2026-10-28
Category: Tips & Care
Refresh your ActiveDogs aluminum raised dog bed with a genuine ballistic replacement cover. Follow these simple steps to swap the fabric and restore comfort and durability.
Quick answer
To replace the cover on an ActiveDogs raised dog bed, remove the old ballistic cover from the aluminum frame, align the new genuine replacement cover, and secure it evenly to avoid wrinkles or sagging.
Why replace the cover instead of the whole bed?
The ballistic HD fabric on your ActiveDogs raised dog bed takes daily wear from claws, weather, and washing. Over time, it can fade, fray, or lose its snug fit. Replacing just the cover is a cost-effective way to extend the life of the aluminum frame, which typically remains sturdy for years.
A genuine replacement cover is designed exclusively for the ActiveDogs Aluminum Raised Dog Bed (Item #602071), so you avoid the guesswork of generic covers that may not fit properly or last as long.
What to check before you start
Before ordering a replacement cover, confirm your bed model. The Ballistic Replacement Cover fits the ActiveDogs Aluminum Raised Dog Bed (Item #602071). If you have a different model, measure the frame dimensions and contact support to ensure compatibility.
Also, check the condition of the aluminum frame. If the frame is bent or rusted, a new cover won't fix structural issues. In that case, consider a full bed replacement.
Steps to replace the cover
- Remove the old cover: Lay the bed on a flat surface. Unhook or unzip the existing cover from the aluminum frame, working from one corner to the other. Gently pull the fabric free, taking care not to bend the frame. Check the frame for sharp edges or damage while the cover is off.
- Clean the frame: Wipe down the aluminum frame with a damp cloth to remove dirt and debris. Let it dry completely before installing the new cover. A clean frame prevents abrasive particles from wearing out the new fabric.
- Align the new cover: Position the new ballistic cover over the frame, making sure the openings align with the corners. Start by securing one corner, then move to the opposite corner to keep the fabric evenly distributed. Misalignment can cause wrinkles or uneven tension, so double-check the fit before fastening all corners.
- Secure the cover: Attach the cover to the frame using the provided fasteners (hooks, straps, or zippers). Work around the perimeter, pulling the fabric taut as you go to avoid sagging. Ensure the fabric is smooth and drum-tight; a loose cover can shift during use.
- Test the bed: Press down on the center of the bed to ensure the cover holds firmly and doesn't slide. Let your dog use the bed and check after a day for any loosening. If the cover loosens, re-tighten the fasteners or adjust the fabric tension.
Product facts
- Ballistic Replacement Cover for ActiveDogs Aluminum Raised Dog Bed: This genuine Ballistic Replacement Cover is designed exclusively to fit the ActiveDogs Aluminum Raised Dog Bed (Item #602071) and is made from premium ballistic HD fabric. Using a genuine cover ensures a precise fit and the same heavy-duty durability as the original, so your dog's bed stays comfortable and secure.
Ballistic Replacement Cover for ActiveDogs Aluminum Raised Dog Bed
